| Motherboard |
• Super X9DRi-LN4F+ |
| Processor/Cache |
|
| CPU |
• Intel® Xeon® processor E5-2600 (up to 130W TDP)
• Dual Socket R (LGA 2011)
Cache
• Up to 20MB
System Bus
• QPI up to 8 GT/s |
| System Memory |
|
| Memory Capacity |
• 24x 240-pin DDR3 DIMM sockets
• Supports up to 768 GB DDR3 ECC Registered memory (RDIMM) in 24 DIMM sockets
• Supports up to 192 GB DDR3 ECC Un-Buffered memory (UDIMM) in 24 DIMM sockets |
| Memory Type |
• 1600/1333/1066MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes |
• 32GB, 16GB, 8GB, 4GB, 2GB, 1GB |
| Memory Voltage |
• 1.5 V, 1.35 V |
| Error Detection |
• Corrects single-bit errors
• Detects double-bit errors (using ECC memory) |
| On-Board Devices |
|
| Chipset |
• Intel® C602 Chipset |
| SATA / SAS AOC |
SATA
• SATA 2.0 3Gbps with RAID 0, 1, 5, 10
• SATA 3.0 6Gbps with RAID 0, 1, 5, 10
SAS AOC
• LSI 2108 SAS2 RAID AOC (BBU optional)
• Hardware RAID 0, 1, 5, 6, 10, 50, 60 |
| IPMI |
• Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• Nuvoton WPCM450 BMC |
| Network Controllers |
• Intel® i350 Gigabit Ethernet
• Virtual Machine Device Queues reduce I/O overhead
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
• 1x Realtek RTL8201N PHY (dedicated IPMI) |
| Graphics |
• Matrox G200eW
|
| Input / Output |
|
| Serial ATA |
• 2x SATA 3.0 ports (6Gbps)
• 8x SATA 2.0 ports (3Gbps)
|
| LAN |
• 4x RJ45 Gigabit Ethernet LAN ports
• 1x RJ45 Dedicated IPMI LAN port |
| USB / JBOD |
USB
• 9x USB 2.0 ports total (4x rear + 4x via header + 1x Type A)
JBOD
• 1x JBOD Expansion Ports |
| VGA |
• 1x VGA port |
| Serial Port / Header |
• 1x Fast UART 16550 serial port
• 1x internal header
|
| Chassis |
|
| Form Factor |
2U Rackmount |
| Model |
CSE-826BE16-R920LPB
|
| Dimensions |
• Width: 17.2" (437mm)
• Height: 3.5" (89mm)
• Depth: 25.5" (648mm)
• Gross Weight: 61 lbs (27.7 kg)
• Available Colors: Black
|
| Front Panel |
Buttons
• Power On/Off button
• System Reset button
LEDs
• Power status LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED
• Power fail LED
|
| Expansion Slots |
PCI-Express
• 3x PCI-E 3.0 x16 slots (Low-profile)
• 1x PCI-E 3.0 x8 slot (Low-profile) |
| Drive Bays |
Hot-swap
• 12x Hot-swap 3.5" SAS / SATA HDD trays
Optional OS Drive
• No rear Hot-swap Drive Bay, SATA DOM Recommended
|
| Backplane |
• SAS2 / SATA3 backplane |
| System Cooling |
Fans
• 3x 8cm 9.5K RPM, 4-pin PWM fans
|
| Power Supply with Power Distributor |
920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C |
| AC Input |
• 100-240 V, 50-60 Hz, 11-4.5 Amp |
| DC Output |
• 4 Amp @ +5V standby
• 75 Amp @ +12V
|
| With Power Distributor |
• +5V: 45 Amp
• +3.3V: 24 Amp
• -12V: 0.6 Amp
|
| Certification |
80PLUS Platinum Certified
|
| System BIOS |
BIOS Type
• 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
• Plug and Play (PnP)
• APM 1.2
• PCI 2.2
• ACPI 1.0 / 2.0
• USB Keyboard support
• SMBIOS 2.3
• UEFI
|
| Operating Environment / Compliance |
RoHS
• RoHS Compliant
Environmental Spec.
• Operating Temperature: 10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)
|
Australia Japan China Taiwan Brazil
